> Products > ADHESIVES & GLUES > HM788 EVA Hot Melt Straight Edge Banding Adhesive

HM788 EVA Hot Melt Straight Edge Banding Adhesive

Akfix HM 788 is a synthetic resin and EVA based hot melt adhesive of thermoplastic characteristic that gives perfect results with straight edge banding works where lower softening point and fast bonding is needed. 



Hot-Melt is used for cstraight edge banding, coating and massive adhesion operations on all kinds of domestic and foreign edge banding machines, also manually operated machines. It is short open time adhesive.

 

  • Appropriate when immediate bonding is required.
  • Environmentally friendly.
  • Economical.
  • High green strength.
  • Non-sticky surfaces.
  • Odourless.
  • Easy to use. 

Environment temperature must be around 15°C during the application process. Adhesive must be applied to one surface of the material to be adhered. Air humidity should be % 65-75 and product humidity should be % 8-10. 



S.Code P.Code Type Volume BoxQty B.Pallet Barcode
GA288 HM788 180°C - 200°C 25 kg 1 - -











Akfix Coating Logo
Akkim Logo

Adresse : 300 Bloor Street East Suite.2202 Toronto Ontario M4W3Y2 ON Canada
Telephone : +1 416 6245721  Fax : +1 416 9279487 E-mail : info@akfix.ca

2017 © Copyright Akfix / All Rights Reserved.


WARRANTY INFORMATION:
AKFIX, warrants only that its product will meet its specifications. AKFIX shall in no event be liable for incidental or consequential damage. AKFIX's liability, expressed or implied is limited to the stated selling price of any goods found to be defective.